Rolling Hanger to easily access your bicycles
Purchase at
shop.gear-blocks.com
With stuff on the floor it can be hard to get to your bike to lift it down. So just slide it over on the rolling hangers. You can hang more bikes if you can move them when you want to get one down.
Works good for tools and other stuff too
Here is the idea: hangers that roll in a channel
It use’s ordinary Unistrut from Home Depot for the channels
How it Works Video
Hanger ready for installing in Unistrut channel
Standard size hook – mountain & road bikes
Tire width <2.35″ (<59mm)
Large hook- mountain & fat tire bikes
Tire width <2.3-3.5″ (58-88mm)
End stops are available for the Unistrut to keep the roller block from rolling off the end
End Stop Installed
Order as many rolling hangers as you need for your situation!
Let’s see how much it can hold. At 151 lbs. the standard hook starts to bend
Customer is responsible to provide the unistrut rails and fasteners. They can can be obtained at most hardware stores.
Get your 10ft 1”-⅝ x 1”-⅝” 12Ga. Strut Channel at local retail stores!
USA
- Home Depot SKU: #455470
- ACE:Item #3227543
- Grainger: FS-200SS PG, FS-200 SL PG
EU
- EU: WÜRTH VARIFIX C-ASSEMBLY RAIL 41×41
- Spain: P1000THX3 http://www.pisa-e.com/
Unistrut and fastener info
12-Gauge Super Strut 10 ft (Home Depot)
Purchasing:
shop.gear-blocks.com
Installation:
You should be pretty handy, and able to use tools and find the studs in your ceiling.
Watch the video: Bob Installing Rack in His Garage
Click the link for detailed written installation instructions
Disclaimer:
This is a DIY project. Brian Moran or gear-blocks.com is not responsible for any damage or injuries related to this product or its installation now or ever.
Warranty: No warranty implied or given.